车用永磁式缓速器设计中漏磁影响因素分析

以优化设计和减少漏磁为目标,运用磁路分析法建立永磁式缓速器的漏磁场模型,得到设计参数的解析式。由于参数之间的复杂函数关系,采用区间数学算法来优化永磁式缓速器的设计参数,将影响漏磁系数的非线性方程组化简为线性方程组。选取满足设计要求的目标参数——转子鼓磁感应强度Bm、气隙磁感应强度Bg,ave、漏磁系数K的最佳取值区间。使用区间迭代法,求出自变量参数的取值区间和权数pi。运用Matlab语言编程直接搜索合理的设计参数,减少了计算量和循环次数。三维有限元漏磁分析和试验均证明了设计参数选取的合理性。结果表明：永磁体高度HPM、气隙ge对漏磁系数K影响较大;区间数学Tschernikow算法在永磁式缓速器设计中是有效的。     

基于分解机制的多目标蝙蝠算法

在分析蝙蝠算法性能基础上,将蝙蝠算法融入分解机制,提出了一种基于分解机制的多目标蝙蝠算法。为了进一步提高算法的多样性,将差分进化策略引入算法中。对14个具有复杂Pareto前沿的多目标优化问题(LZ-09系列和ZDT系列)测试不同邻域规模对算法性能的影响,结果表明新算法的邻域规模为20时性能最优;将其与MOEA/D-DE和NSGA-II算法进行对比分析,结果显示该算法的分布性、收敛性和多样性均优于另外两种算法。为了验证其求解含有约束问题的性能,将其应用于滑动轴承多目标优化设计问题中,获得的Pareto前沿分布均匀,表明算法具有工程实用性,是求解复杂高维多目标问题的有效方法。     

The method for designing the profile of forest roads supported by genetic algorithm

This study examines a method for designing an optimum profile of a forest road in a short matter of time. In this method, a genetic algorithm (GA) searches for points where the gradient changes and dynamic programing (DP) designs the longitudinal slope. This method can be applied to the ground heights of an actual forest road. The evaluation function of the DP assesses the total expenditure. The inverse of this function is the fitness function. Crossover and mutation are operators of an evolution simulation of a GA. They are each repeated 20 times and 420 profiles are designed and assessed, all within about 10 min. A comparison of the profile designed by the GA with that of an actual forest road shows only one section where the formation level differed substantially. Overall, both profiles seem to show a high degree of correspondence. From this result, we believe that the profile designed by the GA is best, or the one of the best. A conventional method takes about 65 h to calculate all changing points of gradients. However, by using the GA, the calculation time was reduced to about 1/389 that of the coventional method, showing that the method which uses the GA through the profile design is very useful.     

塔拉的生态适应性及其在云南适生区域的划分

通过多年的引种对塔拉的生态适应性研究表明,极端低温及降水是制约塔拉生长发育的关键因素.据此将哀牢山以西、怒江、澜沧江下游海拔1450m以下16个县的128个乡镇区划为云南种植塔拉的最佳适生区;哀牢山以东、元江中下游海拔1 250m以下14个县的81个乡镇为一般适生区;公益林种植区为金沙江中游海拔1 100m以下的10个县的62个乡镇.     

实数型遗传算法的研究

在引入实数型遗传算法的基础上,对遗传算法的关键问题交叉和变异操作进行了深入的研究,提出了几种新颖而实用的交叉和突异操作方法。同时,对需编码的传统的二进制型遗传算法和无需编码的实数型遗传算法进行了简要的比较,阐述了实数型遗传算法的优越性。     

日本落叶松在旺苍县引种栽培初步研究

通过对旺苍县盐井河采育场10多年来引种栽培日本落叶松的结果与旺苍县外其它地区的引种栽培试验结果和本地华山松的生长情况进行对比分析，证明引种是成功的，进一步探讨了日本落叶松在旺苍的引种效果和生态适应性，提出了旺苍自然地理分布的引种适生区，是旺苍北部中山区主要速生造林树种之一。     

面向安全服务重组多目标优化的粒子群遗传算法

遗传算法具有快速随机的全局搜索能力,但局部搜索能力差,易陷入早熟收敛,迭代效率低.粒子群算法采用速度——位置模型,可以较快收敛到指定精度.将粒子群算法与遗传算法融合,采用多目标遗传算法得出初步的优化结果,并将其作为粒子,利用粒子群算法强化局部搜索,加快收敛速度,仿真结果证明了该算法的优越性.在CSSM对底层安全服务的重组时利用粒子群和遗传算法的结合(GAPSO),能够提高效率.     

汽车多路传输系统数据的简化算法

介绍了一种应用于汽车多路传输系统中所有关联数据库数据的简化算法.同时对此算法进行了具体的性能分析.汽车多路传输系统允许汽车电子系统内各个智能模块共享信息,实现了信息在各个电子模块中进行实时交换,从而能提高各个智能模块之间的信息交换速度.     

Effects of polyline simplification of dynamic GPS data under forest canopy on area and perimeter estimations

The objectives of this study were to determine Global Positioning System (GPS) positional errors while moving under the forest canopy and to clarify the effects of polyline simplification on area and perimeter estimations. We used the Pathfinder Pro XR and GPSMAP 76S, which are categorized as “high-end mapping” and “general navigation” GPS receivers, respectively. The field tests were conducted in both natural and plantation forests. The results showed that the Pathfinder Pro XR, which has better multipath rejection technology, worked well, especially in the plantation forest under unfavorable conditions of higher stand density. We used analysis of variance to clarify the effects of the receiver type, positioning mode, stand type, and polyline simplification method on area and perimeter estimations. The receiver type and positioning mode were found to be significant factors that affected area estimation. The Pathfinder Pro XR estimated the area more accurately than the GPSMAP 76S, and differential GPS estimated the area more accurately than autonomous GPS. With respect to the perimeter, the receiver type, positioning mode, and polyline simplification method were found to be significant factors. The results showed that perimeter estimation was improved by using the velocity filter, and further improved by using the velocity filter and Douglas-Peucker algorithm, especially when the Pathfinder Pro XR was used. The GPSMAP 76S estimated the perimeter accurately without any filtering because its default speed filter worked well, even though the GPSMAP 76S is a general navigation GPS receiver.     

基于改进蚁群算法的3-PPR并联机构位置正解研究

针对3-PPR并联机构位置正解问题,运用螺旋理论计算其自由度,并分析其运动特性,同时通过解析法构建该并联机构的完整运动学逆解。将并联机构运动学正解问题的求解转化为对目标函数优化问题的求解,并基于此建立该并联机构正解的目标函数优化模型。通过对基本蚁群算法进行有效的改进,构建了可用于求解连续优化问题的改进蚁群算法。运用该算法求解3-PPR并联机构的运动学正解并进行Matlab仿真分析,对比传统数值方法和改进蚁群算法,证实该算法具有良好的全局寻优能力,并能避免初值和局部最优值对计算结果的影响,可有效应用于求解并联机构的位置正解问题。